D-Link DI-206 - Manual (Page 34)

DI-206 ISDN Remote Router
22
Installatio
n
Configuration Utility or Telnet. Regardless, the router can always be
configured using a console connected to the RS-232 Console port.
To configure the LAN:
1. The LAN port must be enabled in the Interface Configuration
sub-menu.
♦
Choose Interface Configuration, LAN.
♦
Position the cursor over the State item and press <space bar>.
The State will change from Disable to Enable.
♦
Position the cursor on the SAVE option at the bottom of the
screen and press <Enter> to save the new setting.
♦
Choose Exit in the sub-menus to return to the Main Menu.
2. Enable IP Networking
♦
Choose Network Configuration, IP Configuration.
♦
Position the cursor over the third item IP Networking and
press <space bar> to Enable it.
♦
Position the cursor on the Save option at the bottom of the
screen and press <Enter> to save the new setting.
3. Assign an IP address to the LAN port in the Network
Configuration sub-menu of the Main Menu.