Care and maintenance, Neutral adjustment (continued) – Dixon 13633-0702 User Manual
Page 35
Advertising
35
CARE AND MAINTENANCE
NEUTRAL ADJUSTMENT (continued)
4.
Stop engine and remove rear of machine from jack or
blocks.
5.
Drive machine with both levers in top speed position. If
one side now drives slightly faster than the other, adjust
lever stop washer P/N 5760 on that side to reduce
forward range of control lever. If levers are now uneven
at top speed, loosen control lever mounting nut. Rotate
lever to be even with other side and tighten nut.
Advertising