Audiovox DT 911 - Manual (Page 14)

jf. 4^
¡íí'Tf
SETTING UP YOUR AUDIOVOX
DT911
Choose an area neaf an electrical
cutlet and a telephone wail jack.
AC POWER ADAPTOR
Plug the AC power adaptor into an
electrical outlet and the OC connector
to the back of the base unit.
HANDSET RINGER
The handsel ringer is progranHaed ON
as Ihe factory default setting. Refer to
PROGRAMMING THE RiNGER on
page # for more information,
SETTl NGTHETONE/PULSESWrrCH
The TONE/PULSE switch i$ located on
the bottom of the base unit and Ss
factory set to TONE. If you have touch
tone service, do not change the switch
setting, if you have rotary [Pulse)
service, set the switch to PULSE.
Jc.: i ;
“ TONE PULSE
SELECTION
и^(Г, ^ :
1¡
. •
» ..
j
CHARGE THE HANDSET BATTERY
PACK BEFORE USE |
The
battery pack recharges
automatically whenever the handset is
in the base unit. The battery pack must
be charged ter t€ hours before using
your phone for the fir^t time.
A
CONNECT TELEPHONE LINE CORD
Plug one end of the telephone cord into
a wall jack, and the othar end into the
back ol the Base Unit.
11
У1ие. ifrjj Aju