Daewoo SD-9500P - Manual (Page 54)

53
Before suspecting a fault (VCR)
• Recording a TV program is
impossible.
• Once pressing “REC”, a videotape is
ejected automatically.
• Timer recording of Cable TV does
not work.
• In spite of pressing “CHANNEL”, a
channel can not be set.
• While duplicating, screen is not
clean and distorted.
• remote control does not work.
• Buttons on remote control do not
work.
• VISS index search does not work.
• Cable broadcasting can not be
selected.
Checks Symptom
➤ For recording, you should use a videotape with a tab.
➤ Please check whether a channel is fixed on video. If not, you have to
turn it into “TV” by pressing “INPUT” button.
➤ Please check whether the timer recording info is right.
➤ Are RF cables in the antenna connection terminal correctly?
➤ Does a CH number selected in display section appear?
➤ Please check a tab on a tape whether it is broken or not. (If it was
broken, please replace with some adhesive tape)
➤ Please check whether the clock is right.
➤ Does the display on your video show “ ” (Ready for timer
recording)?
➤ Please check whether the timer recording info is right.
➤ Please check a tab on a tape whether it is broke or not. (If it is broken,
please replace with some adhesive tape)
➤ Was the cable data output code connected correctly?
➤ Was the cable box setup and output channel right?
➤ Did you enter a password? (Please cancel it.)
➤ Did you turn off your player? (Please turn it on.)
➤ You may not have memorized your channels.
➤ Please check your channel setting or press a number button.
➤ Some tapes or discs distributed in the market for lending is set to
prevent copy in manufacturing. These tapes cannot be duplicated in
a good condition.
➤ Battery may be weak or exhausted.
➤ Are you using the correct remote.
➤ In case a videotape is positioned at the beginning, “VISS REW” and
“REW” do not work.
➤ In case a videotape is positioned at the end, “FF”, “VISS FF”, “PLAY”
and “REC” do not work.
➤ Please check whether another button is pressed.
➤ Are you playing a tape that is not recorded in this recorder? (Try and
record it with the recorder.)
➤ You may start recording it in “REC-PAUSE”. Please start recording it
from stop condition.
➤ Please select “CABLE” not “NETWORK” from the “CHANNEL
SETTING”.
The
o
thers