Hyundai H-CDM8036 - Manual (Page 34)

34
Bluetooth software update
The Bluetooth software of this unit needs to be updated from time to time in order to improve performance and reliability.
Note: You will need a Bluetooth enabled PC/Laptop or PC/Laptop equipped with Bluetooth dongle in order to perform update.
How to update bluetooth software
1. Navigate the car audio’s menu to BLUETOOTH => SETTINGS => INFORMATION, to check firmware version of the unit to
see if an update is needed or not. Take note of the firmware version.
2. Using computer with internet access, open HYPERLINK “http://www.car-bluetooth.com/WELCOME/” (WELCOME must be in
CAPITAL LETTER) and select Download link. The latest firmware version will be listed. If your Bluetooth firmware version is
older than the site listed version, you will need an update. Proceed to step 3.
3. Make sure your PC/Laptop supports Bluetooth connectivity. Using your PC Bluetooth software, pair your PC/Laptop or Dongle
with the head unit using passkey 1234.
4. Navigate the car audio’s menu to BLUETOOTH => SETTINGS => ADVANCE SETTINGS => SOFTWARE UPDATE and
select ACTIVATE.
5. Navigate the car audio’s menu to Bluetooth->Settings->Paired Devices and select the Bluetooth dongle name then press
CONNECT.
6. Download both the Flash update wizard and the Firmware. If the firmware file is zipped, unzip to a folder.
7. Install and run the Flash Update Wizard. Follow UPDATE PROCEDURE => BY BLUETOOTH => USE MS STACK guide on
the website on proper update procedures.