Q-See Q25DVR4ES - Manual (Page 7)

Q-See Q25DVR4ES User’s Manual
Page 7
Chapter 4: System Boot - 4.2 Recovering Lost Data
The system will automatically recover
lost data.
A Power Error can cause data to be
lost.
Chapter 4: System Boot - 4.3 Restore Recording Feature
If a Power Error occurs during
recording process, the system will
automatically resume recording
after power is restored.
Chapter 4: System Boot - 4.4 Main Screen
While the DVR is running, the monitor will
display the view from the cameras as well as
the following:
Upper left: Percentage of hard drive space
used.
Middle: Channel name (CH 1 through CH 4).
Bottom right: Date and Time.
Bottom left: Mode, Status, Hard Drive Info,
and Schedule Setting of the DVR.
Refer to 6.1 Start Recording 10%
RECOVER HDD?
04811-101735
(SELECT)YES/(MENU)NO
Power Error Detected
Restore Hard Disk (Master) OK
Restore REC Mode………… OK