Davis Instruments DRIVERIGHT 8186 - Manual (Page 13)

9
The second dialog box displays.
7. Click Install the software Automatically and click Next. The new drivers
install automatically.
8. Click Finish once the installation is complete.
See “Removing PC/SC Drivers for SmartCard Desktop Reader” below if
the PC/SC driver was previously installed.
Removing PC/SC Drivers for SmartCard Desktop Reader
There are two sets of ACS SmartCard Desktop Reader drivers available for
use with the SmartCard Desktop Reader: The PC/SC Driver and the ACS Pro-
prietary Driver. FMS uses the Proprietary Driver to communicate with the
SmartCard Desktop Reader. Since the PC/SC Driver and the Proprietary
Driver are not compatible, the PC/SC driver must be uninstalled.
The PC/SC Driver may install automatically if the SmartCard Desktop Reader
was installed before DriveRight FMS. To avoid this, do not plug in the Smart-
Card Desktop Reader before DriveRight FMS has been installed.
Note: The following instructions are based on procedures needed on a Windows XP operating
system. The process may vary depending on your operating system.