Desa GA2100A User Manual

Instructions for installing ga2100a fan accessory, Warning, Notice

Advertising
background image

Instructions For Installing GA2100A Fan Accessory

Grounding
Plug

Figure 1 - Grounding Plug

Attaching Fan Accessory

1. Knock out center panel at four tabs with screwdriver (see Figure

2).

2. Position fan housing between fan accessory and heater back panel.

Attach fan accessory and fan housing to heater back panel using
four #8 screws (see Figure 3).

Carton Contents

• One Fan Accessory
• One Fan Housing
• Four #8 Screws
• Two #10 Screws

• One #10 Screw (long)
• Two “U” Nuts
• Three Brackets

Grounded Outlet

Wall Mounting Instructions For Models With Mounting
Bracket

1. Mount heater to wall by following steps under INSTALLING TO

WALL in owner’s manual.

2. Plug power cord of fan into grounded outlet.
3. Discard “U” nuts, brackets, and extra screws provided with fan

accessory.

Wall Mounting Instructions For Models With Raised
Mounting Holes

After attaching fan accessory, heater must be mounted to wall in
different manner than what is specified in owner’s manual. Follow
steps below to mount heater to wall.
1. Locate the two raised mounting areas at top of heater back

panel. Each area has a square hole in center and a key hole at
top (see Figure 4).

Figure 5 - Attaching “U” Nut

2. Insert “U” nut into square hole on each mounting area. Attach

“U” nut as illustrated in Figure 5. Push “U” nut into place.
Screw hole on “U” nut should be visible through key hole in
mounting area.

“U” Nut

Figure 4 - Raised Mounting Areas

Raised
Mounting Area

Key Hole

Square Hole

Screw Hole

“U” Nut

Screw Hole

Continued on Back

Fan accessory must be grounded. Fan comes with a
three-prong, grounding plug as shown in Figure 1. The
plug is your protection against electrical shock. Plug it
into a standard, three-hole, grounded, outlet. If cord
needs replacing, use only a cord with a three-prong,
grounding plug.

WARNING

!

WARNING ICON

G 001

If wall mounted, heater must be disconnected from
gas supply and removed from wall before installing
fan accessory. Contact a qualified service person to
do this. All local codes must be followed.

NOTICE

Fan
Accessory

Figure 2 - Center Panel

Center
Panel

Tab

#8 Screw

Fan Housing

Figure 3 - Attaching Fan Accessory and Fan Housing

Advertising