Dodge 2007 Ram Pickup 3500 - Manual (Page 315)

You should use first gear when starting from a standing
position. Damage to the clutch can result from starting in
2nd or 3rd gear. Use each gear in numerical order – do
not skip a gear.
To shift into Reverse, come to a complete stop. Depress
the clutch and pause briefly to allow the gear train to
stop. Reverse has a “crash-through” lockout feature.
Move the shift lever from the Neutral position straight
across, in one swift motion, and down into Reverse.
Recommended Shift Speeds
To use your manual transmission for fuel economy it
should be upshifted as listed below. Shift at the vehicle
speeds listed for acceleration. Earlier upshifts during
cruise conditions (relatively steady speeds) will result in
increased fuel economy, and may be used as indicated.
Higher upshift speeds may be used to obtain a desired
acceleration rate.
6 Speed Manual Transmission Shift Speed in mph (km/h)
En-
gine
Model Axle
Accel-
eration
Rate
1 to
2
2 to
3
3 to
4
4 to
5
5 to
6
3.7L 1500 ALL
AC-
CEL &
CRUISE
15
(24)
10
(16)
24
(39)
19
(31)
34
(55)
27
(44)
47
(76)
37
(60)
56
(90)
41
(66)
4.7L 1500 ALL
AC-
CEL &
CRUISE
15
(24)
25
(40)
40
(65)
45
(72)
50
(81)
Downshifting – All Manual Transmissions
Moving from a high gear down to a lower gear is
recommended to preserve brakes when driving down
steep hills. In addition, downshifting at the right time
provides better acceleration when you desire to resume
speed. For acceleration at speeds less than 20 mph (30
km/h), 2nd gear is recommended.
STARTING AND OPERATING 315
5