3DLABS Oxygen VX1-16 - Manual (Page 22)

Software Configuration
3Dlabs Oxygen VX1-16 User's Guide 12
Setup Screen
The Setup screen lets you configure settings that are not specifically related to Direct3D or OpenGL.
You can enable (check) and disable (uncheck) the 3Dlabs multi-monitor Windows Manager, which
requires a system restart. This option is only available if there is more than one 3Dlabs display card in
the system.
You can enable (check) or disable (uncheck) the Taskbar based
Configuration Manager with a mouse click. The default setting is enabled. This application provides
quick access to the main features of the Control Panel. When the taskbar application is enabled, it
appears on the taskbar (system tray) each time the system is started. To remove the application from
the taskbar, disable (uncheck) the option and restart the system.
The Gamma Adjustment slider on the Setup screen lets you simultaneously adjust RGB color curves
and define the color output for your display. You can also enter a precise Gamma value, rather than
use the slider, when you know which value is appropriate for your monitor and ambient lighting
conditions.