3xLOGIC View Lite Smart Device App - Manual (Page 30)

Digital
PTZ
Enables Digital PTZ mode.
l
Tap and hold to drag the image around the screen.
l
Pinch together or spread apart two fingers on the screen to zoom in and out of the
picture.
When Zoomed, a small window featuring the full camera frame will appear in the top
right corner of the screen to aid users in navigating the image.
Note: Digital PTZ mode does not utilize any hardwired PTZ components and only alters the image while main-
taining original resolution. Hard-wired PTZ controls are only available on applicable cameras.
Pan/Tilt
Access hardwired Pan and Tilt mode. Drag your finger onto any of the four quadrants of the frame to move the camera.
A blue line will appear to indicate direction. The longer a user makes the line, the faster the camera will pan and tilt.
Hardwired PTZ camera's are indicated both in full screen and from the main screen by a symbol in the top right
corner of their window frame.
Zoom
Access hardwired zoom mode. Pinch together or spread apart two fingers on the screen to zoom in and out of the pic-
ture.
Focus
Access Focus mode. Pinch together or spread apart two fingers on the screen to adjust the cameras focus.
Bright-
ness
Access Brightness setting. Pinch together or spread apart two fingers on the screen to adjust image brightness.
Presets
Access Preset list(pictured below.) Choose a preset number from the list to move the camera to the chosen preset posi-
tion.
Save Pre-
sets
Save the camera's current position to a preset number. Tap the number in the list to save the current potion to that pre-
set number.
3.5 Saving and Loading Views
To save your current view(your current layout including assigned cameras):
©2014 3xLOGIC Inc. | View Lite Smart Device Application - User Guide - 26 -