Installation manual, Visix network camera – 3xLOGIC VISIX Camera User Manual

Page 51

Advertising
background image

Installation  Manual

 |  

VISIX  Network  Camera

 

 

10225  Westmoor  Drive,  Suite  300,  Westminster,  CO  80021  |  www.3xlogic.com  |  (877)  3XLOGIC

 

 

50  

6) Insert  the  hex  key  into  the  hole  marked  in  the  picture  and  rotate  the  hex  key  to  adjust  the  panning  

position  and  tilting  position  until  the  desired  surveillance  angle  is  achieved.  Tighten  the  set  screws  to  
lock  the  angle.  

 

Figure  5-­‐34

Adjust  Panning  Position      

 

Figure  5-­‐35

Adjust  Tilting  Position    

NOTE:  

As  the  lens  of  camera  has  already  been  factory  adjusted  to  the  best  image,  you  just  need  to  adjust  
the  panning  position  and  tilting  position  to  get  the  desired  surveillance  angle.  

7) Reinstall  the  cover  before  viewing  the  image  so  that  the  image  you  receive  will  appear  the  same  as  it  

would  after  final  installation.  

8) Install  the  cover,  and  tighten  the  set  screws.  

Advertising