Accutone General Telephone Headset - Manual (Page 3)

ii. wearing your telephone headset
using the flexible microphone boom
All of Accutone's telephone headsets have rotatable and flexible microphone
boom, so you can easily adjust the boom so that the microphone capsule are
located as illustrated.
*
C
1/2"
1/2"
Position the microphone capsule approximately 1/2" from your mouth. The
top of the microphone capsule should be facing towards your mouth.
To convert it into a earloop wearing
style, insert the plastic rod at the end of
the earloop (3) into the rubber ring
inside the speaker chamber (2) as
shown. With little pressure, it should fit
in easily; stop when sense resistance.
When properly assembled, the extruded
portion should be entirely inside the
speaker chamber.
using the quick disconnector
*
Each Accutone telephone headset
comes with a quick-disconnector
linking your headset portion to the
modular jack cable. This is for your
convenience, so you don't have to
take off your headset when you
want to leave your desk for a short
while. Connect your cables as
illustrated, until you can feel a slight
clicking sound.
converting a convertible headset - over-the-head mode
Gently hold the 2 indicated points and pull the headband (1) away from the
speaker chamber (2) in a vertical direction only. To re-insert the headband
simply insert it into the rubber ring inside the speaker chamber gently.
*
1
2
3
2
converting a convertible headset - earloop mode *
wearing a earloop headset *
To properly wear the earloop headset,
hold the headset by the earloop, hook
the earloop behind your ear and place
the speaker chamber on top of your
ear touching the ear cushion.
Rotate the microphone arm and adjust
the microphone to your preferred
position, you can rotate the mic boom
to accomodate left or right ear wearing
as shown in section ii.
click!
E
D