Accutone WT89 - Manual (Page 6)

[ inspiring people, inspiring change ] C. ENJOYING YOUR WT89 HEADSET
total wireless solution in action!
Product in Action Product in Action
9 10
C2. making wireless telephone calls
C1. wearing your wireless headset
The WT89 wireless headset is designed
to be worn by both left and right ear.
However, users cannot just turn the
headset body to shift the microphone
to the other side for alternate ear
wearing.
The proper way to change your
headset from left-ear wearing to right-
ear wearing or vice-versa must be done
by removing the headset body from the
headband.
X
Gently remove the headband from
the headset body as shown in
. The current illustration shows a
right-ear wearing method.
Rotate the headset body 180º as
shown in
.
Re-insert the headset body onto
the headband as shown in
.
Make sure you hear a clicking
sound to ensure the headset has
been fastened to the headband.
Step
A
Step B
Step C
C
1
5
C3. adjusting volume and mute function
4
3
During a call, you can adjust the
speaker volume by pressing the
Volume Up (3) or Volume Down (4)
Buttons. There are three steps of
adjustments only. Each level increase
or decrease is signal by a single beep
sound. A double-beep sound suggests
the maximum setting is reached.
To mute the microphone, press the
Volume Down Button (4) for 2 sec.
until you hear a beep. The indicator (6)
will flash in blue slower than usual.
To Mute Microphone.
Press (4) continuously for 2 seconds.
6
A
B
Put on your headset, adjust the Headband
Extension (1) to fit your head. Press the
Answer Button (5) and lift the handset of your
telephone from the cradle to make a call.
If you are using an automatic lifter, pressing
the Answer Button (5) will also signal the lifter
to automatically lift the handset.
Notice the Online / Paging Indicator (B) on
the base unit lights up blue.