Accutone T1 - Manual (Page 4)

Hooking all the parts together! Hooking all the parts together!
5 4
connection & preparations. connection & preparations.
A.3 Connect to an Additional Terminal Extension
For user who requires an extra telephone extension at their terminal,
connect an extra patch cable to the Line Jack of the telephone to the (11)
Extension Telephone Jack located adjacent the (10) Land-line
Connection Jack.
A.2 Connect to Wall Jack
Use the RJ-11 Modular Patch Cable provided to connect the T1 headset
telephone to any standard Telephone Wall Jack. The connection plug to the
Wall Jack maybe different depending on your country or region. Locate the
end of the Patch Cable with the RJ-11 Modular and connect it to the (10)
Land-line Connection Jack at the bottom of the T1 unit.
® The T1 Telephone is designed to pair with any series of Accutone
Telephone Headset, TM363VT is shown above.
First, make sure the (QD) Quick Disconnector of the headset and the
bottom cable are firmly connected as shown. Then, connect the RJ-9
Modular Jack of the headset to the (7) Telephone Headset Jack of the T1
Telephone.
A.4 Connect to Headset
connect to wall jack. 10
11
Extension Telephone Jack
Double check if the connections are
done correctly, by making a call using
either the T1 Telephone or the
Extension-Telephone just connected.
Both devices should be able to make
and receive calls.
7
QD
A.5 Connect to Recording Device
T1 is equipped with the function of
voice and call recording. Connect any
audio recording device with a 3.5mm
plug to the (8) Recording Jack
located next to the Telephone
Headset Jack of the T1 Telephone.
8
Recording Jack
T1 Professional Headset Telephone
A A