Dodge JOURNEY 2010 - Manual (Page 266)

UNIVERSAL CONSUMER INTERFACE (UCI) — IF
EQUIPPED
NOTE: This section is for sales code RES/REL and
REQ/RET radios only with uconnect
௡. For sales code
RBZ/REN/REZ touch screen radio and REU/REX/RE1
radio, refer to the separate User’s Manual.
This feature allows you to plug an iPod ௡ mobile digital
device into the vehicle’s sound system through a connec-
tor (UCI connector) using an optional connection cable
(available through MOPAR
௡). See your authorized dealer
for details.
Using this feature,
• the iPod௡ audio can be played on the vehicle’s sound
system, providing metadata (Track Title, Artist, Al-
bum, etc.) information display on radio.
• the iPod௡ can be controlled using the radio buttons to
Play, Browse and List the iPod
௡ contents.
• The iPod௡ battery charges when plugged into the UCI
connector (if supported by the specific iPod ௡ device)
Connecting The iPod ா Device
Use the optional connection cable to connect an iPod
௡ to
the vehicle’s UCI connector (which is located in the glove
box or center console on some vehicles. This location may
vary with vehicle). Once the iPod
௡ is connected and
synchronized to the vehicle system (this may take a few
seconds to connect), the vehicle brand logo appears on
the iPod
௡ display, and it starts charging and is ready for
use by pressing radio switches as described below.
Controlling The iPod
ா
Using Radio Buttons
To get into the UCI (iPod ௡) mode and access a connected
iPod
௡, press the “AUX” button on the radio faceplate.
Once in the UCI (iPod ௡) mode, the iPod௡ audio track (if
available from iPod ௡) will start playing over the vehicle
audio system.
4
UNDERSTANDING YOUR INSTRUMENT PANEL 265