Acrosser AR-B1893 - Manual (Page 24)

AR-B1893 User’s Guide
AR-B11893 Pentium M inside (With VGA)
with On Board DDR, 4 Port built in LAN, 1 Mini PCI, 1 CF
24
IDE
Primary Slave Options are in its sub
menu
(described in Table 3) Press <Enter> to enter
the sub menu of detailed
options
IDE
Secondary Master Options are in its sub
menu
(described in Table 3) Press <Enter> to enter
the sub menu of detailed
options
IDE
Secondary Slave Options are in its sub
menu
(described in Table 3) Press <Enter> to enter
the sub menu of detailed
options
Drive A & Drive B None
360K, 5.25 in
1.2M, 5.25 in
1.720K, 3.5 in
1.44K, 3.5 in
2.88K, 3.5 in Select what kind of floppy
type you install
Video EGA / VGA
CGA 40
CGA 80
Mono Select what type of
Display you use
Halt On All Errors
No Errors
All, but Keyboard
All, but Diskette
All, but Disk/Key Select the situation in
which you want the BIOS
to stop the POST process
and notify you
Base Memory N/A Displays the amount of
conventional memory
detected during boot up
Extended Memory N/A Displays the amount of
extended memory
detected during boot up
Total Memory N/A Displays the total memory
available in the system
Table 1 Main Menu Selections
IDE Adapters
The IDE adapters control the hard disk drive. Use a separate sub menu
to configure each hard disk drive.
Figure 2 shows the IDE primary master sub menu.