Acrosser AR-B1841 - Manual (Page 35)

AR-B1841 User’s Guide
AR-B1841 35
4.10 Exit Selecting
Save & Exit Setup
Load Optimized Defaults
Exit Without Saving
Load Fail-Save Default
Figure 8 Exit menu
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and EXIT (Y/N)? Y
Pressing “Y” stores the selections made in the menus in CMOS – a
special section of memory that stays on after you turn your system off.
The next time you boot your computer, the BIOS configures your system
according to the Setup selections stored in CMOS. After saving the
values the system is restarted again.
Load Optimized Defaults