Acrosser AR-B104D - Manual (Page 18)

AR-B104D Software Programming Guide
14
timebase of the selected input channel. 0 indicates the base is 1 ms; 1
indicates the base is 100 ms.
2.3.16 GetCounterValue
♦ Description
Get the counter value of the selected input channel.
♦ Syntax
XXX_GetCounterValue (i16 CardNum, i16 ChannelNum, u16* Value)
♦ Argument
CardNum: The card number of AR-B104D. Range from 1~4.
ChannelNum: Input channel number. Range from 0~11.
Value: The memory address of buffer to put the counter value of the
selected input channel.
2.3.17 SetCounterTarget
♦
Description
Set the counter target value of the selected input channel. An interrupt will
trigger if the counter value is equal to counter target value.
♦
Syntax
XXX_SetCounterTarget (i16 CardNum, i16 ChannelNum, u16 Value)
♦ Argument
CardNum: The card number of AR-B104D. Range from 1~4.
ChannelNum: Input channel number. Range from 0~11.
Value: The counter target value of the selected input channel.
2.3.18 GetCounterTarget
♦ Description
Get the counter target value of the selected input channel. An interrupt will
trigger if the counter value is equal to counter target value.
♦ Syntax
XXX_GetCounterTarget (i16 CardNum, i16 ChannelNum, u16* Value)
♦
Argument
CardNum: The card number of AR-B104D. Range from 1~4.
ChannelNum: Input channel number. Range from 0~11.
Value: The memory address of buffer to put the counter target value of
the selected input channel.