Acrosser AR-B1631 - Manual (Page 3)

AR-B1631 User’s Guide
SPECIFICATIONS
CPU: GX3
Chipset: CS5536 or CS5535
RAM memory: Supports DDRA, on-board 200-pin SO-DIMM up to 512MB DDRAM memory module
Display Interface: CRT – D-SUB 15-pin female connector
LVDS – for 18 bit TFT LCD Panel.
Ultra ATA/33/66/100 IDE Interface:
Floppy disk drive interface: 2.88 MB, 1.44MB, 1.2MB, 720KB, or 360KB floppy disk drive.
Series ports: On-board one D-SUB 9-pin male connector for COM1 with RS-232C. On-board one
2x5x2.00mm pin-header connector for COM2, COM3 and COM4with RS-232C.
Parallel Port: On-board one supports SPP/EPP/ECP modes
USB port: Four USB 2.0
Audio: onboard AC’97 Codec, Supports IN/OUT, and Left/Right speaker out, MIC IN, CD IN.
Ethernet: On-board one RTL8100BL, supports 10/100Mbps Base-T with RJ-45 connector built-in LED
K/B & Mouse: On-board PS/2 Keyboard and Mouse connector
Power Req.:
+5V 2A and +12V 1A maximum
PC Board: 6 layers, EMI considered
GPIO :8pin (4 output and 4 input) TTL compatible
Dimensions: 6.5” x 4.5”
Operating Temperature: 0
o C~ 60℃
3