Acrosser AR-B1520 User Manual
Ar-b1520 industrial grade cpu board user’ s guide
Advertising
Table of contents
Document Outline
- PREFACE
- 1. INTRODUCTION
- 2. INSTALLATION
- 3. CONNECTION
- 3.1POWER ON CONNECTOR (PWR)
- 3.2KEYBOARD & MOUSE CONNECTOR (PS/2)
- 3.3CPU FAN POWER CONNECTOR (FAN)
- 3.4HARD DISK (IDE) CONNECTOR (IDE)
- 3.5INFRARED CONNECTOR (IR)
- 3.6I/O CONNECTOR FOR SERIAL PORT、VGA CRT AND PARA
- 3.7 ETHERNET RJ-45 CONNECTOR (LAN)
- 3.8 USB CONNECTOR (USB)
- 3.9 GPIO CONNECTOR (GPIO)
- 3.10 RESET CONNECTOR (RST)
- 3.11 CLEAR CMOS (CMOS)
- 3.12 INTERAL BUZZER (LS1)
- 3.13 COM2 RS-232/RS-485 SELECT (P2,P3)
- 3.14 RS-485 TERMINATOR SELECT (JP2)
- 3.15 RS-485 HEADER (JP3)
- 3.16 SDRAM SOCKET 144 PIN (SODIMM)
- 3.17 COMPACT FLASH CONNECTOR (CF)
- 3.18 PC104 PLUS CONNECTOR (PCI)
- 3.19 COMPACT FLASH CONNECTOR SELECT (JP4)
- 3.20 LCD CONNECTOR (LCD)
- 3.21 LCD PANEL VOLTAGE SELECT (JP1)
- 3.22 LED MODEL CONNECTOR (LED1)
- 4. WATCHDOG TIMER
- 5. BIOS CONSOLE
- Date & Time Setup
- Hard Disk Setup
- Quick Power on Self Test
- USB Controller
- USB Keyboard Support
- CRT
- LCD
- OnBoard Serial Port 1
- OnBoard Serial Port 2
- OnBoard Serial Port 3
- OnBoard Serial Port 4
- UART Mode Select
- OnBoard Parallel Port
- Parallel Port Mode
- First Boot Device
- Second Boot Device
- Third Boot Device
- Boot Other Device
- Save & Exit Step
- Load Setup Defaults
- Exit Without Saving
- APPENDIX A. ADDRESS MAPPING
- APPENDIX B. INTERRUPT REQUEST (IRQ)