Acrosser AR-B9622 - Manual (Page 7)

AR-B9622 User’s Guide
1. OVERVIEW
This chapter provides an overview of your system features and capabilities. The following topics are covered:
Introduction
Packing List
Features
1.1 INTRODUCTION
The AR-B9622 is a new generation half-size, 386SX board. This card offers much greater performance than the
older cards such as support for onboard 4MB DRAM and one RS-232C/485 and three RS-232C ports and one
socket for the DiskOnChip from 2MB up to 72MB.
The unit also comes with a programmable watch dog timer and other typical interfaces. The 386 CPU board is
excellent for embedded systems, MMI’s, work stations, medical applications or POS/POI systems. As well, an
RS-232C/485 port provides the remote control. RS-485 interface is only offered recently on 386 cards.
Especially the AR-B9622’s on-board VGA, offers the most exciting possibilities yet to the industry. The on-board
VGA/LCD controller brings about a whole new dimension of industrial computing. No longer do you have to worry
about adding an extra card to your system. The VGA/LCD unit comes with 1MB V-RAM on board and uses the
C&T 65545 Chipset, to support a wide range of LCD Panels.
1.2 PACKING LIST
The accessories are included with the system. Before you begin installing your AR-B9622 board, take a moment
to make sure that the following items have been included inside the AR-B9622 package.
The quick setup manual
1 AR-B9622 all-in-one single CPU board
1 Hard disk drive interface cable
1 VGA 10-pin cable
2 Parallel port interface cables
1 Keyboard adapter
1 PS/2 mouse adapter
4 phone-jack to DB-9 adapters
2 Software utility diskettes
1.3 FEATURES
The system provides a number of special features that enhance its reliability, ensure its availability, and improve its
expansion capabilities, as well as its hardware structure.
80386SX-33/40 MHz CPU
PC/104 extension bus
On-board CRT and LCD panel display
Supports IDE hard disk drives
Supports floppy disk drives
Supports 2 bi-directional parallel port
PC/AT compatible keyboard
Up to 72MB for one DiskOnChip
Programmable watchdog timer
Flash BIOS
Signal 5V power requirement
Multi-layer PCB for noise reduction
Dimensions : 145mmX142mm
1-1