Acrosser AR-B1631ET - Manual (Page 19)

AR-B1631ET User’s Guide
PnP/PCI
Reset Configuration Data [Disable]
Normally, you leave this field Disabled. Select Enabled to reset the Extended System
Configuration Data (ESCD) when you exit the Setup if you have installed a new add-on and the
system reconfiguration has caused such a serious conflict that the operating system cannot
boot.
Resources Controlled By [Auto (ESCD)]
This field sets control over the IRQ resources by the automatic (ESCD) system or manual
assignment of IRQ channels. The default enables the automatic (ESCD) control. Configuration
options: [Auto (ESCD)] [Manual].
4.5 PERIPHERALS
Peripherals
19/30