Acrosser AR-B1894 - Manual (Page 21)

3. System Installation
This chapter provides you with instructions on how to setup your system. The
additional information shows you how to install CPU/ FAN and memory.
3.1
Socket 478 Processors
3.1.1 Installing Intel ®
Pentium
®
M / Celeron
®
M CPU
The processor socket comes with a screw to secure the processor, please
unlock the screw first.
Position the CPU above the socket and the gold triangular mark on the CPU
must align with pin 1 of the CPU socket. Then Insert the CPU gently seated
in place.
Turn the screw to the lock position.
Note: Do not force the CPU into the socket. It may bend the pins and
damage the CPU.
3.2 Installing Cooling Fan
Warning： For a safety landing, avoid leaving prongs on hard surface.
Instructions：
Smear thermal grease on the top of the CPU. Lower the CPU
fan onto the CPU/CPU socket and secure it using the
attachments or screws provided on the fan. Finally, attach the
fan power cable to the CPUFAN adapter. For more details on
this, go to
http://www.intel.com
Unlock
Pin 1 of the
socket
Gold
triangular
mark
Lock