Dixon 2003 - Manual (Page 19)

19
CONTROLS
MOWER DECK CUT HEIGHT LIFT LEVER:
•
Located to the right and front of
operator.
•
Controls the cutting height.
•
Seven positions of adjustment.
•
Depress trigger and move lever forward
to lower deck.
•
Depress trigger and pull lever back to
raise deck.
NOTE: Always use high position for transport.
BLADE DRIVE:
•
Located on control panel to
operator’s right.
To engage blade: Pull up on switch.
To disengage blade: Push down.
CIRCUIT BREAKER
:
•
Located on control panel to
operator’s right.
•
Protection of the electrical system
is by (1) 15 amp circuit breaker.
•
If circuit breaker trips, push button
to reset.
•
If this condition repeats, consult
dealer for inspection and repair.