SoundMax SM-CMD2022 - Manual (Page 22)

22
2.
If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1
loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio
and PTY word disappears.
3.
Press PTY button for the 3 rd time to switch the PTY function off.
Other settings
Press and hold SEL button to enter the menu mode. Press it repeatedly to choose the
needed item: MASK DPI/ALL => TA SEEK/ALARM => RETUNE L/S.
TA (Traffic Announcement) mode
To determine what action will the radio take if the newly tuned station does not receive
TP (Transport Program) information for 5 seconds. Rotate VOL knob to select the desired
mode: TA ALARM and TA SEEK.
-
TA SEEK
When newly tuned station does not receive TP information for 5 seconds, the radio
retunes to next station which has not the same station (PI – Program Information) as
the last station, but has the TP information. When TP information gets lost at the current
station for retune time which is set by RETUNE SHORT (30 seconds) or RETUNE LONG
(90 seconds), the radio starts to retune to next same PI station. When same PI station
does not catch in 1 cyclic search, the radio retunes to next station with TP information.
-
TA ALARM
During searching the radio does not retune but the double beep sound (alarm) is output.
RETUNE mode
To determine the initial time of automatic TA (Traffic Announcement) search.
There are 2 modes: RETUNE L and RETUNE L.
-
RETUNE L: 90 seconds.
-
RETUNE S: 30 seconds.
Note: Retune mode is active for TA SEEK mode only.