ADLINK ASD26-MA2 Series - Manual (Page 6)

1.2.4. Band Performance (CrystalDiskMark)
Capacity Access Type MB/s
Sequential Read Up to 190 (SATA 3 Gb/s)
Sequential Write Up to 100 (SATA 3 Gb/s) 16 GB
ATTO: read up to 190MB/s, write up to 100 MB/s
Sequential Read Up to 190 (SATA 3 Gb/s)
Sequential Write Up to 100 (SATA 3 Gb/s) 32 GB
ATTO: read up to 195MB/s, write up to 105 MB/s
Table 2: Maximum Sustained Read and Write Bandwidth
Notes: 1). Performance measured using CrystalDiskMark, ATTO.
2). 1 MB/sec = 1,048,576 bytes/sec is used in measuring sequential performance. If
1 MB/sec = 1,000,000 bytes/sec is used, performance values become 4.85% higher.
3). Test platform: Sandy Bridge (Windows 7 64-bit)
4). Actual performance dependent on specific application.
1.2.5. Read and Write IOPS (IOMETER)
Capacity Access Type IOPS
4K Read (IOPS) 3,900 (SATA 6 Gb/s)
4K Write (IOPS) 660 (SATA 6 Gb/s) 16 GB
CDM QD32 IOPS up to Read 3,900, Write 660
4K Read (IOPS) 4000 (SATA 3 Gb/s)
4K Write (IOPS) 700 (SATA 3 Gb/s) 32 GB
CDM QD32 IOPS up to Read 4000, Write 700
Table 3: Random Read/Write Input/Output Operations per Second
Notes: 1. Performance measured using IOMETER Pro with queue depth set to 32, Crystal Disk Mark QD32
2. Write cache enabled
3. Test platform: Sandy Bridge (Windows 7, 64-bit)
6
Specification