ADLINK STC-15W04 - Manual (Page 52)

44 BIOS
4.5.2 South Bridge Configuration
Restore AC Power Loss
Select AC power state when power is re-applied after a power
failure. Set this value to Power Off, Power On, Last State.
Azalia Controller
Select a OnBoard Azalia Configuration. Set this value to Dis-
abled, HD Audio.
Select USB Mode
Select USB mode to control USB ports. Set this value to By
Ports, By Controllers.
UHCI #1 (ports 0 and 1)
Control the USB UHCI (USB 1.1) functions. Disable from high-
est to lowest controller. Set this value to Disabled, Enabled.
UHCI #2 (ports 2 and 3)
Control the USB UHCI (USB 1.1) functions. Disable from high-
est to lowest controller. Set this value to Disabled, Enabled.