ADLINK Food-D19 IP69k - Manual (Page 46)

Document:
Manual_Giant_Food_Series.docx Page 46 of 47 pages Last change date: 25-Oct-11
Never shock, hit, overheat, burn, scratch, smash, … your PENTA IPC. This will
destroy your PENTA IPC or parts thereof.
The administrator password for the used operating system and/or BIOS is very
important! The loss of the password can cause data loss or will heavily
influence the software installation of your system.
Because the administrator password is the main key for your system (access
to all data, possibility to change all options … ) it is very important, that only
authorised persons will have access to this password!
Invalid changes of BIOS settings can make your system useless or will cause
data loss and/or hardware damage!
Any damages and/or problems caused through invalid BIOS changes will not
be covered by warranty!
Hazardous voltages are present in this electrical equipment during operation.
Failure to proper equipment maintenance can result in death, severe personal
injury or substantial property damage. The instructions contained in this
chapter have to be followed.
•
Maintenance shall be performed only by qualified personal.
•
Always de-energise and ground the equipment before maintenance.
•
ESD can destroy your Hardware – always ground yourself before touching
parts inside the PENTA product.
•
Use only authorised parts to repair/upgrade the equipment.
•
Unqualified intervention will cause system damage and leads to warranty
loss.
Computer components are highly sensitive devices. ESD and wrong treatment
can damage and destroy your IPC and / or your add-on cards.
Only qualified personnel should handle your computer hardware
Beware from ESD – ground yourself and your hardware first!
Warning for medical appliances:
Accessory equipment connected to the analog and digital interfaces must be
certified according to the respective IEC standards (e.g. IEC 950 for data
processing equipment and IEC 601-1 for medical equipment). Furthermore all
configurations shall comply with the valid version of the system standard IEC
601-1-1. Everybody who connects additional equipment to the signal input part
or signal output part configures a medical system, and is therefore responsible
that the system complies with the requirements of the valid version of the
system standard IEC 601-1-1. If in doubt, consult the technical service
department or your local representative.
!
!
!
!
!
!