Alwarerc ALware Quad Flyer Spider 500 ( Kit Only ) - Manual (Page 4)

G2:
­Tension Spring 0.6x4.9x18mm x4pcs
­Tension Spring 0.6x4.9x22mm x4pcs
­3x7x3mm Flange Bearing x4pcs
­M2 Nut x2pcs
­M3 Nut x4pcs
­Washer 2x5x0.5mm 18pcs
G3:
­M2x6 Hex Cap Screws x34pcs
­M2x8 Hex Cap Screws x48pcs
­M3x4 Hex Cap Screws x8pcs
­M3x8 Hex Cap Screws x4pcs
G4: (Spare Parts)
­M2x6 Hex Cap Screws x2pcs
­M2x8 Hex Cap Screws x2pcs
­M2 Nuts x2pcs
­M3 Nuts x1pcs
­Washer 2x5x0.5mm x2pcs
H5: FPV Mount Lock x2pcs
H6:
­Linkage Rod x1pcs
­Ball­Link x2pcs
­Ball x2pcs
­M2x6 Hex Cap Screws x2pcs
H7:
­M2x4 Hex Cap Screws x2pcs
­M2x6 Hex Cap Screws x7pcs
­M2x8 Hex Cap Screws x5pcs
­M2x18 Hex Cap Screws x6pcs
­M2 Nuts x20pcs
­Washer 2x5x0.5mm x2pcs
­Damper Rod (short) x05pcs
­Damper Rod (long) x1pcs
Important Notes for the assembly steps:
− , it is very important to apply RC Threadlocker to every
screws when fixing metal parts including metal Nuts, otherwise a serious hazard
may be happened during the flying time.
− Don't over tighten any screws, or some parts may be damaged permanently.
− Some of the assembly direction is unique and important, please follow the
assembly direction shown on the photos, otherwise you may fail to complete the
rest steps.
www.alwarerc.com