Ambir ImageScan Pro 820i - Manual (Page 13)

13
3. Plug the square end of the included USB cable into the USB port at
the rear of the scanner.
4. Plug the rectangular end of the USB cable into an available USB port on
your computer.
5. If you plan to connect your scanner to a USB hub 3 , make sure the hub is
connected to the USB port in your computer. Next, connect the scanner
to the USB hub.
Step 2. Installing the Software
1. Switch on the scanner power from the rear of the scanner.
2. If the USB components on your computer are functioning correctly, they
will automatically detect the scanner causing the Add New Hardware
Wizard or Found New Hardware Wizard to launch.
3. For Windows 7:
a. When the Setup/Application CD is for several scanner models:
i. Insert the Setup/Application CD-ROM, included with your
scanner, into your CD-ROM drive. Click Run install.exe in the
AutoPlay window.
ii. Click on the Yes button if the User Account Control dialog
pops up. Follow the instructions in the pop-up installation
message.
iii. In the Device Manager window, right-click on this scanner
under Other devices and select Update Driver Software from
the pop-up menu. Click Browse my computer for driver
software in the window that appears, and click the Browse
button.
iv. In the Browse For Folder window, select the folder or the CD-
ROM drive that contains this scanner’s driver and click the
OK button to return to the previous screen. Click the Next
button and click Install this driver software anyway if the
Windows Security window appears. Please skip to step 8.
b. When the Setup/Application CD is for one scanner model
i. Insert the Setup/Application CD-ROM, included with your
scanner, into your CD-ROM drive. Click Run install.exe in the
AutoPlay window.
ii. Click on the Yes button if the User Account Control dialog
pops up. If the pop-up wizard window appears click Next,
and click Install this driver software anyway in the Windows
3
A USB hub is not included with the scanner.
Information
If your computer is off when the scanner is
connected, the ―Add New Hardware Wizard‖
message will not be displayed until the
computer is on and Windows starts.