American Energy Systems MF3513S Fuel Stirrer - Manual (Page 2)

F:\AESBusinessSystems\AES Technical\Piece part instructions\MF3513S Fuel Stirrer.doc
• Once in proper placement, rotate the fuel stirrer in the firepot. Ensure the fingers of the fuel stirrer do
not touch the inner radius of the firepot.
• Place firepot, fuel stirrer and coupler into
the cradle. Ensure all parts line up on a
central axis with the fuel stirrer drive
shaft. Slide the couple over the drive
shaft.
• Push fuel stirrer drive shaft and fuel stirrer
all the way to the left until the end of the
fuel stirrer touches the fuels stirrer stop
tab.
• Move the 2 shafts in opposite direction until
this gap is about 1/8”.
• Push the collar against the firebox wall and
tighten it.
• Plug unit in.
• Restart unit.