American Energy Systems MF3542 Exhaust Blower - Manual (Page 3)

F:\AESBusinessSystems\AES Technical\Piece part instructions\MF3542 Exhaust Blower.doc
• Remove any loose debris from the exhaust tube mounting onto the unit.
• Prior to mounting on the stove inspect the gasket to make sure it has not been damaged if
it has you need to replace the gasket MF3610.
• Install onto unit using the (5) ¼-20 x ¾” hex bolt see picture below for location for each
unit. Pictures looking in from the control panel side.
• Connect wires per instructions connect the wire lead from blower to the white lead from
the wire harness, depending on customer requirement connect the black lead of the
blower to the pink lead and black lead to white from wire harness.