American Energy Systems O2 Catalytic - Manual (Page 27)

27
should exceed 2.0 for any material used.
MOBILE HOME STOVE ATTACHMENT
1 Install combustion air to the bottom of the stove as shown in FIGURE 10 in all mobile home applications. The
other end of the combustion air tube is installed through the mobile home floor.
2
A pedestal stove may receive combustion fresh air either through the mobile home floor or through the mobile
home exterior wall. FIGURE 11 demonstrates both options.
3
Install a mesh screen or an approved chimney cap on the outside of the mobile home combustion air tube. This
cap will keep foreign material, birds, or small animals out of the fresh air system. Do not use mesh screen from windows
as it has too small a hole.
FIGURE 11: MOBILE HOME PEDESTAL INSTALLATION