American Energy Systems O2 Catalytic - Manual (Page 16)

16
confusion, about which one to select, the local Country Flame Dealer or Country Flame will be able to assist in the
selection of the appropriate shroud kit.
Once the stove is properly located in the opening, leveled on the floor, and installed in its finished position, the installer
would pull the stove out from the fireplace in order to install a shroud kit on the catalytic stove. FIGURE 9 shows a
shroud kit on a generic stove; however, each Country Flame shroud kit comes with detailed instructions for use in
installing the kit on a specific model stove. Refer to these instructions and in the event of any confusion, contact Country
Flame or its local dealer to assist with clarification.
FIGURE 9: SHROUD AND TRIM INSTALLATION
WARNING: Unit is not certified for mobile home installation.
MOBILE HOME RULES
1 Install only a HUD-approved laboratory tested stove in a mobile home. If the metal tag permanently
affixed to a stove does not specifically state; “mobile home approved to HUD Standard UM-84,” do not install
it in a mobile home.