American Energy Systems Inglenook - Manual (Page 31)

Version: 7.1 31
ELECTRICAL LINE INSTALLATION
120 VOLTS AC FOR BLOWER SYSTEM
The Inglenook blower system requires a 120-volt alternating current, 15-ampere, 60-Hertz power
supply circuit. Figure 20 shows the basic electrical diagram for the Inglenook’s blower system.
CAUTION: Moving parts may cause Injury. Do not operate the Inglenook with its lower grill
open.
FIGURE 20
IN-WD01
INGLENOOK BLOWER
WIRING DIAGRAM
PP-12
110 DEGREE HEAT SENSOR
P-350
RHEOSTAT 200, NO ON/ OFF SWITCH
PP-1158 INGLENOOK
BLOWER MOTOR
PP-1157
ELECTRICAL OUTLET
GREEN TO GROUND ON
BLOWER HOUSING
PP-988
POWER CORD
PP-1158 INGLENOOK
BLOWER MOTOR
PP-988
POWER CORD
BLACK
WHITE TO NEUTRAL
GREEN TO GROUND
BLACK TO POWER
BLACK
BLACK
BLACK BLACK
GREEN TO GROUND ON
BLOWER HOUSING
WHITE
WHITE