American Sanders American 8 Drum Sanders - Manual (Page 5)

Clarke ® American Sanders American 8 Floor Sander Operator's Manual Page 5
PART NUMBER 07032C 07105A 07048C 07106A
Abrasive Size 8 x 26½” paperback 20.3 x 67.3 cm
Contact Wheel Speed (rpm)* 2400/2800 2000/2333
Abrasive Speed (sfm)* (m/min)* 4398/5131 sfm 1117/1303 m/min.
Dust Fan Speed (rpm)* 6000 5000
Dust Fan Flow (cfm)* 210 cfm 83 liters/second
Motor 60 Hz 230V 4hp (3 kW) 50 Hz 240V 3hp (2.2 kW)
Leveling Control Externally Adjustable
Operating Control Adjustable Lever
Motor Starter/Protector Magnetic Circuit Breaker
Sanding Pressure Adjustment Infinitely Adjustable
Wheels (Truck Assembly) Steel ** Urethane*** Steel** Urethane***
Wheel (Rear) Steel Canvas Steel Canvas
Drive V-Belt
Dimensions 40½ x 15 x 36 3 /
4
103 cm x 38 cm x 93 cm
Weight 216 lbs. 98kg
Operating Controls
Motor Starter / Protector
Sanding Pressure
Adjustment
Leveling Controls
Tool Storage Tray
Introduction and Machine Specifications
* revolutions per min. *surface feet per min. *meters per min * cubic feet per min.
**Steel (Standard) Urethane or canvas (optional) ***Urethane (Standard) Steel or Canvas (optional)
CAUTION: Your equipment may be inappropriate on some installations. Some softer woods used in flooring cannot
support the pressure created by hard wheels.
A felt or rubber wheel should be used when these woods are encountered.
See parts list for optional wheels.
Always consult with the flooring manufacturer on the proper installation, preparation, and finishing of their
product. Determine suitability of your equipment in preparing the product.