AMT Datasouth Documax A6300 - Manual (Page 105)

5.3 Printer Diagnostics
Printer Diagnostics
The following printer diagnostics are available to aid in troubleshooting printer
malfunctions. They are accessed while in the Setup Mode under Menu 9 Diagnostics. To
initiate these diagnostics, perform steps 1-5.
NOTE
Paper must be loaded prior to performing
printer diagnostics .
1. Open the Keypad Door to access Setup Menu.
2. Press Next Menu key until the display appears as shown.
3. Press Feature  key until display indicates name of diagnostic to be performed.
For example:
4. Press Enter key to start the selected test. LCD display will alternate as follows:
5. Press Enter key to stop, or close the Keypad Door.
5-8
M9 DIAGNOSTICS
Run Self Test
<Diagnostics>
`Enter' To Stop