AMT Datasouth Fastmark 600 - Manual (Page 15)

Fastmark 600 Series User's Guide 15
INSTALLATION AND CONFIGURATION
Finding a Location for the Printer
Determine a suitable location for the printer and power supply brick with the following
requirements:
•
Find a flat stable surface with sufficient clearance to allow for interface cables and media
loading.
•
The location should be near the host or terminal. Consider the distance between the host
and printer for the communication cable (serial or parallel cable).
•
The location should be free from excessive direct sunlight, temperature, humidity, dust,
dirt, and debris.
•
The location should be near a grounded AC power receptacle wired in compliance with
local ordinances.