AMT Datasouth Fastmark PT-1 - Manual (Page 11)

11
Fastmark PT1 User ’s Guide
Charging the Battery
1. After installing the Battery Pack, connect the Power Supply into the
printer’s Power Input
Jack.
2. Then plug the Power Supply into the AC wall receptacle. The p
rinter’s Battery LED will
remain yellow during charging.
3. The battery is designed for fast-charge; after about 3.5 hours (210 minutes), the Battery
LED will turn off, signifying that the battery is fully charged and ready for use.
Power Input Jack
Power Supply
Note: Operating the printer when charging will increase
charging time. Wait until battery is fully charged to
operate the printer.