ANSMANN 5025132 DigiCharger Vario Pro - Manual (Page 6)

GB
operating instructions
features
The Digicharger Vario
pro is a universal fast charger for battery packs used in cameras,
camcorders and mobile phones, plus for charging AA and AAA batteries. With the
help of an adjustable contact set , the Digicharger Vario
pro is able to charge nearly
all common lithium batteries for cameras, camcorders and mobile phones. In addition,
the unit is also able to charge USb equipment via its USb output port. (USb cable is
not included). Using the inter-changeable mains plug system for world wide use, or
the DC car lighter plug, (included in the package), the Digicharger Vario
pro is ideally
suited for travelling around the world. The operation of the Digicharger Vario pro is simple
and straight-forward. All relevant information can read off the clear LCD display. The
emergency supply is an additional feature which makes the Digicharger Vario
pro your
perfect charging companion.
safety instructiOns
> please read the operating instruction carefully before using the Digicharger Vario
pro
> Keep the charger in a dry place
> Never attempt to open the charger by force and do NoT use if any part is in a defective condition
> The charger must be protected against high humidity and water
> Keep away from children’s reach
> please only use the AC power supply or DC car lighter plug that is supplied
> The Digicharger Vario
pro is only for use with Li-Ion, Li-pol and NiMH technology cells
Do not use with disposable cells or any other types as there is a risk of explosion
> remove the Digicharger Vario pro from the power source after charging
Operating instructiOns
Connect the power to the Digicharger Vario
pro using the supplied AC power supply (please
use the right input plug for your country) or use the DC car lighter plug.
charging lithiuM Batteries:
The Digicharger Vario
pro has a two point sliding cover, for charging batteries with
large housings. The second point of the sliding cover will be activated by pushing the
ANSMANN button (1) on the top. The charger has two flexible contacts (2), which are
adjusted with the blue guiding pins (3). The height of the contacts can be adjust for
better connection to the batteries with recessed pins by using the thumb wheel (4). For
charging the battery pack, please insert the battery at the contact end and bring the
contact pins into the correct positions. one contact has to be connected to the minus
and one at the plus pole of the battery. The charger will automatically choose the right
polarity so connection can be made either way round. The charger will automatically choose