SoundMax SM-CDM1035 - Manual (Page 10)

10
Functions of controls
General operations
Reset the unit
Operating the unit for the first time or after replacing the car battery, you must reset the unit.
Press RELEASE button, then press the RESET button to restore the unit to the original factory settings.
Power button
Press the PWR button to switch the unit on. Press it again to switch the unit off.
Note: After the unit is off, volume level and radio current settings will be memorized, and when you turn the
unit on it will resume the stored status you set.
Volume control
Rotate VOL knob clockwise to increase the volume level; rotate anticlockwise to decrease the volume level.
Audio settings adjustment
Press SEL button (VOL knob) shortly and repeatedly to select the mode: VOL => BAS => TRE => BAL =>
FAD. Rotate the VOL knob to adjust each mode.
NOTE: Adjustments to Bass and Treble will override any preset EQ (Preset Equalizer Curves).
In each mode, the waiting time is about 5 seconds, and the waiting time is over, it returns to the last display
mode of radio or disc playback mode.
Mode selection
Press the MODE button to select the mode: BAND => CD
Mute function
Press the MUTE button to cancel the sound. Press again to resume.
Clock display
-Shortly press CLK button to display time even when power is off. Hold on the button to enter the set mode:
Use buttons to set the exact time.