Dixon 61935-0603 - Manual (Page 32)

32
CARE AND MAINTENANCE
LUBRICATION:
1. Engine: Follow engine manufacturer’s recommenda-
tion.
2. Deck spindles: Lubricate with 3 “shots” only, every
100 hours.
HYDROSTATIC TRANSMISSIONS:
Before each use, check to be sure that the cooling fins
and fans of the pumps and wheelmotors are clean.
Excessive accumulation of oil, dirt, or trash may cause
the transmissions to overheat. NEVER WASH ACROSS
TOP OF RESERVOIR WITH WATER OR STEAM. Fill
reservoir as required per the maintenance schedule
listed in this book.
V-BELTS:
There are 3 v-belts on your Dixon Zero Turning Radius
Mower. They should be checked every 50 hours. Replace any
belts found to be in poor condition.