dbx Pro 480 - Manual (Page 8)

®
Introduction
DriveRack ™
DriveRack™ User Manual
• Time Alignment and Transducer Alignment Delays
• Compressor/Limiter on every output
• Speaker Compensation EQ (post crossover)
• Multi-level Security System
• Separate House and Show EQ with individual lockouts
• Triple redundant backup of all parameters when running network, 480R and PC GUI
• TYPE IV™ Conversion System
• Electronically balanced/RF filtered Euroblock Inputs and Outputs
• Proprietary RS-485 Control Network
• RS-232 PC Interface for computer display and configuration
482 DriveRack™ features:
• 4 Input and 8 Outputs with routing
• 31 band graphic or 9 band parametric equalizer on every input (pre-crossover)
• Dual Real Time Audio Analyzers
• Butterworth, Bessel or Linkwitz-Riley crossover filters
• 27 Different Crossover Configurations
• Time Alignment and Transducer Alignment Delays
• Compressor/Limiter on every output
• Speaker Compensation EQ (post crossover)
• Multi-level Security System
• Separate House and Show EQ with individual lockouts
• Triple redundant back up of all parameters when running network, 480R or GUI
• TYPE IV™ Conversion System
• Electronically balanced/RF filtered XLR Inputs and Outputs
• Proprietary RS-485 Control Network
• RS-232 PC Interface for computer display and configuration
480R DriveRack™ features:
• Dedicated remote interface to control all 480, 481 and 482 DriveRack™ units
• 31 Motorized faders for equalization control
• 32 assignable hot-keys with up to 64 different assignment capabilities
• Built-in Real Time Audio Analyzer (with rear-panel XLR connector)
• System Mute button
• Proprietary RS-485 Control Network
• RS-232 PC Interface for computer display and configuration
• 480P Power Supply Included
• Responds to MIDI commands from mixing consoles including: Soundcraft™ SM20
and Series 5, Allen & Heath™ ML5000 and Midas™ Heritage
iii