Austin Hughes CS - 116 - Manual (Page 26)

UM-CV-751-CS-116-Q215V1 www.austin-hughes.com
CS-116
2.9.1 User Administration
At startup of the AP, the system will prompt user to enter the password to access to the system. The administrator can add or
remove a user easily via the web pages.
There are two levels of access privileges:
User Name Default Password Access Privileges
root root full access
(user define) (user define) only can access to Serial Port and System Status & log
2.9.2 Add User
To add a user,
■
Check the users at the User administration screen
■
Click the button Add
Figure below shows the Add User screen.
You will see the new user is on the user list now.
P.22
Note :
■
The first character of User name must be alphabet.
■
The password should be at least 3 characters long.
■
The user name or password must not longer than 32 characters.
■
Only root user can access to Network and System administration.
< 2.9 > System Administration