Dual XDVD8285 - Manual (Page 86)

XDVD8285 OPERATION
85
General Operation - Multi-Zone Menu
Touch to set CD/DVD mode as the Multi-Zone mode, (CD/DVD must be inserted)
Touch to set CAMERA mode as the Multi-Zone mode, if optional camera isn't
connected then "No Video Signal" will be displayed.
Touch to access BLUETOOTH mode, (BLUETOOTH must be activated first). Refer
to page 1 for more details.
Touch to RETURN to previous screen
Touch to set the Multi-Zone mode in STANDBY (Off).
Notes: When the Multi-Zone mode is set to STANDBY (Off), the video signal from
the 6.5" TFT is shown by default and the Multi-Zone audio is disabled.
Press and hold the MODE button on the front panel for more than 
seconds to change the Multi-Zone mode from STANDBY (Off) to active.
Touch to set AUXILIARY A/V INPUT mode as the Multi-Zone mode.
Touch to set SD mode as the Multi-Zone mode, (SD card must be inserted)
Touch to access SCREEN SETUP menu
Touch to access GENERAL SETUP menu
Touch to access ASP Config menu
Touch to access CD/DVD SETUP menu, (CD/DVD must be inserted to function)
Touch to access MULTI-ZONE source menu
Touch to access MAIN source menu
RAPID DIAL can also control touch screen functions from the multi-zone menu
Select desired function rotating clockwise or counter-clockwise
Function will be outlined in yellow
Press to confirm/ENTER •
•
•
Multi-Zone Menu Access
Touch Access Buttons
Rapid Dial
11
10
9
8
7 6 5
1
L
There are two methods to access the Multi-Zone menu
Press the MENU button on the front panel, then press Multi-Zone
Touch the upper left corner of the touch screen, then press Multi-Zone •
•
 3 4
1
13
1
2
3
4
5
6
7
8
9
10
11
12
13