AValon RF TX618M - Manual (Page 8)

AVALON RF, INC. Page 6
TX418M/TX518M/TX618M User’s Guide & Operating Manual
2.5 Mechanical
2.5.1 Mounting.
Mounting can be done in one of the following methods:
a) Clamping.
Clamping (or hard mounting) is the only method of mounting in all
fixed installations.
Clamping is the preferred method of mounting in all mobile
installations where most electrical interfaces are used. This is due
to the connector and cable weight.
b) Clip on.
Avalon RF offers a clip on kit. This method is recommended when
only one or two interfaces are in use.
c) Velcro ® to a flat surface.
Using Velcro ® to secure the transmitter is recommended when
only a few interfaces are in use.
d) Drop-in.
The transmitter can be dropped into a bucket mounted on the side
of the video camera, like the ones usually found in ENG service.