Bonaire 3 Star Mid Efficiency - Manual (Page 2)

Mid Efficiency Ducted Gas Heater.
Owner’s Manual
Page 2
CONGRATULATIONS ON YOUR CHOICE.
Congratulations on purchasing this 3 star mid efficiency gas central heating system, an exciting
new product manufactured by Climate Technologies.
Wholly designed and manufactured in Australia, this Mid Efficiency Ducted Gas Central Heater
represents an exciting new development in warm air furnace design. It embodies the latest
advances in gas heating technology.
Your heater is supported by Climate Technologies, Australia’s most advanced manufacturer of a
complete range of climate control products.
To ensure you fully enjoy the benefits of this Mid Efficiency Ducted Gas Central Heater, please
read these instructions carefully and keep them handy for future reference.
Operated and maintained in accordance with this manual, this unit will provide you with years of
quiet, warm and environmentally friendly operation. Please take the time to read this manual.
‘Due to Climate Technologies policy of continuous product improvement, design and technical
specifications are subject to change without notice.’
E.&O.E.
GENERAL INFORMATION.
Important Notice.
If an appropriately qualified person is not used to install the equipment or if it's not installed
according to the guidelines, then Climate Technologies will not accept responsibility for any
problems, which occur as a result.
Data Location.
Your appliance model number, serial number and model description are located on the appliance
data plate on the end of the heater in the vicinity of the electronic controls access. These details
should also be in the warranty section of this booklet.
You will need this information, should your appliance require servicing, spare parts or just if you
require additional information about this product.
Assembly.
There is no assembly required of this Mid Efficiency Ducted Gas Central Heater. Your Dealer or
installer will carry out all assembly and commissioning upon installation.