Using the printer cleaning card -4, Using the printer cleaning card, Run a printer cleaning card – Datacard Group ImageCard SelectTM and UltraGrafix SelectTM Printers User Manual

Page 48

Advertising
background image

4-4

Maintaining the printer

User’s Guide for ImageCard® Select™ and UltraGrafix® Select™

9

Replace the print ribbon cartridge.

10 Close the swing arm, pressing it down until the push latch clicks into place.

11 Close the printer top cover.

♦

Using the printer cleaning card

Use the printer cleaning card when prompted or according to schedule. You can run a
printer cleaning card whenever you are not printing, whether or not you have been
prompted.

Run a printer cleaning card

If the printer has a locking card cartridge, unlock the cartridge before removing it.

1

Remove the card cartridge and set it aside.

If the print ribbon sticks to the printer cleaning card, remove the print ribbon

and repeat this procedure with a new printer cleaning card.

2

Peel the protective paper backing from both sides of the printer cleaning card (see
Figure 4-4).

Figure 4-4: Printer cleaning card

3

Insert the printer cleaning card on the input rollers, which you can see after
removing the card cartridge (see Figure 4-5).

Figure 4-5: Insert the printer cleaning card

4

Start a cleaning cycle by doing one of the following:

E

E

Advertising