Chicago Gaming Nicktoons Nitro - Manual (Page 5)

Nicktoons Nitro • Copyright 2008 • Raw Thrills • All rights reserved .
5
4. Open the top coin door and locate the key for the backdoor and the cashbox.
5. Locate hardware kit: [2] Marquee Support Brackets
[2] Base Connect Boards
[1] Seat Base Extension
[4] ¼-20 x ½” Black Hex Head Bolts (Shorter)
[8] ¼-20 x 1 ¼” Hex Head Bolts (Longer)
[12] ¼” Flat Washers
[1] Crossover Network Cable
6. Remove the backdoor from the cabinet and visually inspect the electronic components.
7. Verify that all connectors are secure and that the bottom of the cabinet is free of loose objects, which may have
possibly come loose during shipping.
CAUTION: Access to back of the games should be limited to service personnel only! Allow minimum clearance between
back of game and wall structure for cable and ventilation while preventing non-authorized access. Maximum clearance
should be 6 inches (15 cm), in accordance with local code or whichever is less.
Connecting Dollar Bill Acceptor
Nicktoons Nitro is designed to utilize dollar bill acceptor:
MEI Model Number: AE2451U3
Voltage: 115v AC
Part Number: 250004166
Note: If you are installing a dollar bill validator, you must also switch out the coin box for one that is
smaller